|
|
| |
|
|
China Beihai Cheng Tak reports success with No. 5 production line-The 20th China(Guangzhou) Die-casting, Foundry & Industry Furnace Exhibition
1/7/2019 壓鑄展-鑄造展- Die-casting expo-foundry expo |
--------------------------------------------------------------------------------------------------------------- |
|
China’s Beihai Cheng Tak Metal Rolling Co., Ltd. has completed hot run test of No. 5 solution annealing pickling line at end of December last year successfully.
The first hot-rolled stainless coil was AISI304 and it only took 5 months to install related facilities and then output smoothly. The No. 5 solid solution line is designed as mixed production, and equipped with three continuous rolling units, which will enable processing of stainless strips with different grade and surface on production line.
This production line was mainly for hot-rolled & cold-rolled stainless coil of 200 series and 300 series. The line speed is about 120meter/min, and annual capacity will be at 700,000 tons, and available dimension as 1000-1550mm wide and 1.0-6.0mm thickness.
The project was an important key of Beihai Cheng Tak in 2018, after completion, annual capacity of solid solution pickling can reach 3.5 million tons. Besides, Beihai Cheng Tak can self control the quality of hot-rolled coils and establish stable standards for further processing of cold-rolled stainless.
壓鑄展-鑄造展-2019第二十屆廣州國際壓鑄、鑄造及工業(yè)爐展覽會-中國最受關(guān)注的壓鑄鑄造展會-巨浪展覽
-The 20th China(Guangzhou) Die-casting, Foundry
& Industry Furnace Exhibition
-Die-casting exhibition, Die-casting
expo,2019 Die-casting exhibition, 2019 Die-casting expo, China Die-casting
exhibition, China Die-casting expo, Foundry exhibition, Foundry expo, 2019
Foundry exhibition, 2019 Foundry expo, Industry Furnace exhibition, Industry
Furnace expo, 2019 Industry Furnace exhibition, 2019 Industry Furnace expo,
China Industry Furnace exhibition, China Industry Furnace expo
|
|
|
|
|
